Part Number: ADP6011

Product Description:

High Speed Lava ISA Single Port ECP - EPP Parallel Card

Category: I/O Cards

The ADP6011 is the industry's first consumer-oriented parallel port capable of logical addressing beyond LPT 1/2/3. With the ability to support a full selection of IRQs, the ADP6011 has the configurability that made Lava famous.

We also carry these other parallel cards:

ADP6010	Single Port High Speed Parallel ISA
ADP6011	Single Port IEEE-1284 Parallel ISA
ADP6012	Single Port IEEE-1284 Parallel PCI
ADP6013	Dual Port IEEE-1284 Parallel PCI

General Specifications: ADP6011

Single 25-pin Enhanced (ECP/EPP) Parallel Port. Maximum transfer rate: 2.5 M bytes/sec
Supports both Enhanced Capabilities Port (ECP) and Enhanced Parallel Port (EPP) standards
ECP modes supported: no-interrupt/interrupt/DMA/DMA+interrupt
Fully IEEE-1284 compliant; tested with "MS-ECP Compliance Test"
Fully backward compatible with standard 4-bit and 8-bit (bi-directional) parallel ports
Configurable as LPT 1 through LPT 6, using IRQ 2/3/4/5/7/10/11/12, DMA 1/3/none
Lava Lifetime Warranty

Technical Specifications: ADP6011

Overall length: 163 mm
Depth at back: 14 mm (towards rear of computer); Unseated depth: 23 mm
Depth at front: 64 mm (towards interior of computer) Unseated depth: 73 mm
Mass: 60 g
Jumper selectable to addresses 03BC, 0378, 0278, 0238, 0288, 0388 (hex)
Frequency: 24.000 MHz
Signal degradation: 3.65 mm
Operation temperatures: 0°-70°C
Maximum humidity: 90% at STP
Input impedance: 15 ohms
Infant Mortality: 0.137% (average for all Lava products)
CSA compliant, FCC compliant, CE marked

Categories and Products Related to: High Speed Lava ISA Single Port ECP - EPP Parallel Card

Click Heading for Related products >	Main Product Categories	>		Accessories >	I/O Cards >	ADP6011
		>	Accessories >	Parts >	I/O Cards >

E-mail product page to a friend